advanced web statistics

How To Change Toro Lawn Mower Oil

Changing the oil in a Toro lawn mower is a straightforward process that should take no more than 30 minutes. It is recommended to change the oil every season or after every 50 hours of use. This will ensure that your mower runs smoothly and efficiently. Here are some steps you should follow to change the oil in a Toro lawn mower.

  • Gather the necessary supplies. You will need a new oil filter, new oil, a funnel, a ratchet, an oil pan, and a wrench. You may also need a new spark plug if your mower is more than two years old.
  • Check the dipstick. Before you start, you should check the dipstick to make sure the oil level is at the proper level. If it is not, add oil as needed.
  • Drain the old oil. Carefully place the oil pan underneath the mower and remove the plug on the bottom of the oil pan. Allow the old oil to fully drain out.
  • Replace the oil filter. Unscrew the oil filter with the ratchet and wrench, then replace it with the new oil filter. Tighten the filter to the recommended specification.
  • Replace the oil. Using a funnel, pour the new oil into the oil pan. Make sure not to overfill the pan. Replace the plug and tighten it.
  • Replace the spark plug. Remove the old spark plug using a wrench and replace it with a new one. Tighten the plug and secure it.
  • Start the mower. Start the mower and allow it to run for a few minutes. This will allow the oil to circulate and fill the filter. After the mower has been running for a few minutes, turn it off and check the oil level.

Once you have followed these steps, your Toro lawn mower should be ready to go. Make sure to check the oil level and adjust it as needed. It is also important to check the oil filter regularly and replace it when necessary. By following these simple steps, you will ensure that your mower is running efficiently and smoothly.